Differentiation of Parametric Equations | 参数方程求导

📚 Differentiation of Parametric Equations | 参数方程求导

In A-Level mathematics, many interesting curves such as circles, ellipses and cycloids are not easily expressed as y = f(x). Instead, we often describe both x and y in terms of a third variable, typically t or θ, called a parameter. To analyse the gradient, find tangents or determine stationary points for such curves, we need a technique known as parametric differentiation. This article covers the Edexcel A-Level method for finding dy/dx and d²y/dx² from parametric equations, including key formulae, worked examples and common pitfalls.

在 A-Level 数学中,许多有趣的曲线(如圆、椭圆和摆线)很难直接写成 y = f(x) 的形式。我们通常使用第三个变量 t 或 θ(称为参数)来同时描述 x 和 y。要分析这类曲线的斜率、求切线或确定驻点,就需要用到参数求导法。本文涵盖 Edexcel A-Level 大纲中由参数方程求一阶导数 dy/dx 和二阶导数 d²y/dx² 的方法,包括核心公式、例题和常见错误。


1. What Are Parametric Equations? | 什么是参数方程?

A parametric curve is defined by expressing the x- and y-coordinates of each point in terms of an independent parameter, usually t. For example, x = t² − 1, y = t³ + 2t. As t varies, the point (x, y) traces out a curve. Parametric forms are extremely useful for modelling motion, where t represents time, and for describing curves that fail the vertical line test.

参数曲线通过一个独立参数(通常用 t)来表示各点的 x 坐标和 y 坐标。例如 x = t² − 1, y = t³ + 2t。当 t 变化时,点 (x, y) 会描绘出一条曲线。参数形式在建模运动(t 表示时间)以及描述不满足垂直线检验的曲线时非常有用。

In Edexcel A-Level, you will encounter parametric equations involving polynomials, trigonometric functions, exponentials and sometimes rational functions. The parameter may be denoted t, θ or another letter, but the differentiation technique remains the same.

在 Edexcel A-Level 考试中,你会遇到含多项式、三角函数、指数函数甚至有理函数的参数方程。参数可能用 t、θ 或其他字母表示,但求导方法不变。


2. Why Standard Differentiation Fails | 为何常规求导不再适用

When a curve is given as y = f(x), we can directly apply rules like the chain, product or quotient rule. However, in a parametric representation, y is not explicitly a function of x; both x and y are functions of t. To find the gradient of the curve, we must relate the small changes in y and x via the parameter. This introduces the classic parametric differentiation formula.

当曲线以 y = f(x) 给出时,我们可以直接使用链式法则、乘法法则或除法法则。但在参数表示中,y 并不是 x 的显函数;x 和 y 都是 t 的函数。要找到曲线的斜率,我们必须通过参数把 y 和 x 的微小变化关联起来,这就引出了经典的参数求导公式。

Essentially, we compute dy/dt and dx/dt separately, and then use the chain rule in the form dy/dx = (dy/dt) / (dx/dt), provided dx/dt ≠ 0.

本质上,我们先分别计算 dy/dt 和 dx/dt,然后利用链式法则的形式 dy/dx = (dy/dt) / (dx/dt),要求 dx/dt ≠ 0。


3. The Fundamental Formula for dy/dx | 一阶导数 dy/dx 的基本公式

If x = x(t) and y = y(t) are differentiable functions of t, then the derivative of y with respect to x is given by:

若 x = x(t) 和 y = y(t) 都是 t 的可导函数,则 y 关于 x 的导数由下式给出:

dy/dx = (dy/dt) ÷ (dx/dt)

This result can be remembered as “derivative of y with respect to t over derivative of x with respect to t”. It comes directly from the chain rule: dy/dt = dy/dx · dx/dt, and rearranging gives the required expression. This formula works as long as dx/dt is not zero at the point of interest.

该结果可记作“y 对 t 的导数除以 x 对 t 的导数”。它直接来自链式法则:dy/dt = dy/dx · dx/dt,移项即可得到所需表达式。只要在所讨论的点 dx/dt 不为零,该公式就成立。


4. Step-by-Step Method for Parametric Differentiation | 参数求导的逐步方法

Follow these steps when tackling any parametric differentiation problem in Edexcel A-Level exams:

解答 Edexcel A-Level 考试中的参数求导题时,可按以下步骤进行:

  • Step 1: Differentiate x with respect to t to find dx/dt.
  • 步骤 1:对 x 关于 t 求导,得到 dx/dt。
  • Step 2: Differentiate y with respect to t to find dy/dt.
  • 步骤 2:对 y 关于 t 求导,得到 dy/dt。
  • Step 3: Write dy/dx = (dy/dt) / (dx/dt).
  • 步骤 3:写出 dy/dx = (dy/dt) / (dx/dt)。
  • Step 4: Simplify the expression, possibly cancelling common factors of t.
  • 步骤 4:化简表达式,尽可能约去 t 的公因子。
  • Step 5: (If required) Evaluate dy/dx at a specific value of t or a given point.
  • 步骤 5:(如果需要)代入特定的 t 值或给定点计算 dy/dx。

Always state the condition dx/dt ≠ 0 when presenting your final derivative, as this is where the formula is valid.

在给出最终导数时,务必注明条件 dx/dt ≠ 0,因为这是公式成立的前提。


5. Example 1 – Basic Polynomial Parametric Curve | 例题 1:基础多项式参数曲线

Given the parametric equations: x = t² − 2t, y = t³ − 3t. Find dy/dx in terms of t.

给定参数方程:x = t² − 2t, y = t³ − 3t。求用 t 表示的 dy/dx。

First, compute dx/dt = 2t − 2 = 2(t − 1). Next, dy/dt = 3t² − 3 = 3(t² − 1) = 3(t − 1)(t + 1). Then dy/dx = [3(t − 1)(t + 1)] / [2(t − 1)] = (3/2)(t + 1), for t ≠ 1. Notice the cancellation of (t − 1), which highlights why we exclude the point where dx/dt = 0.

首先,计算 dx/dt = 2t − 2 = 2(t − 1)。接着,dy/dt = 3t² − 3 = 3(t² − 1) = 3(t − 1)(t + 1)。于是 dy/dx = [3(t − 1)(t + 1)] / [2(t − 1)] = (3/2)(t + 1),其中 t ≠ 1。注意 (t − 1) 被约去,这正好说明了为什么要排除 dx/dt = 0 的点。

This simple example illustrates that the parametric derivative can often be simplified into a neat linear or rational expression, making further calculations (like finding tangents) straightforward.

这个简单例子说明,参数导数通常可以化简为一个整齐的线性或有理表达式,从而使后续计算(如求切线)变得简单。


6. Example 2 – Trigonometric Parametric Equations | 例题 2:含三角函数的参数方程

A curve is defined by x = a cos³ t, y = a sin³ t, where 0 ≤ t ≤ π/2. Find the gradient of the curve in terms of t.

某曲线由 x = a cos³ t, y = a sin³ t 定义,其中 0 ≤ t ≤ π/2。求用 t 表示的曲线斜率。

Differentiate x: dx/dt = a · 3 cos² t · (−sin t) = −3a cos² t sin t. Differentiate y: dy/dt = a · 3 sin² t · (cos t) = 3a sin² t cos t. Therefore, dy/dx = (3a sin² t cos t) / (−3a cos² t sin t) = − (sin t) / (cos t) = −tan t, after cancelling common factors (3a, cos t, sin t). The derivative exists for t where cos t ≠ 0 and sin t ≠ 0 (i.e., t non-zero and non-right angle in this interval).

对 x 求导:dx/dt = a · 3 cos² t · (−sin t) = −3a cos² t sin t。对 y 求导:dy/dt = a · 3 sin² t · (cos t) = 3a sin² t cos t。因此,dy/dx = (3a sin² t cos t) / (−3a cos² t sin t) = − (sin t) / (cos t) = −tan t,约去了公因子 3a、cos t、sin t。导数在 cos t ≠ 0 且 sin t ≠ 0(即该区间内 t 不为 0 且不为直角)时存在。

Parametric curves involving trigonometric functions often yield elegant derivatives like −tan t, which immediately tells us how the slope behaves along the curve.

涉及三角函数的参数曲线常常得出像 −tan t 这样简洁的导数,直接告诉我们曲线上斜率的变化规律。


7. Finding the Equation of a Tangent | 求切线方程

Once dy/dx has been found, we can determine the equation of the tangent at a point corresponding to a given parameter value t₀. The gradient m = dy/dx evaluated at t = t₀. The coordinates of the point are (x(t₀), y(t₀)). The tangent line is then y − y(t₀) = m (x − x(t₀)).

一旦求出 dy/dx,就可以确定对应参数值 t₀ 的点处的切线方程。斜率 m 为 t = t₀ 时的 dy/dx 值。该点坐标为 (x(t₀), y(t₀))。切线方程即为 y − y(t₀) = m (x − x(t₀))。

For the curve x = t², y = 2t, find the tangent at t = 1. dx/dt = 2t, dy/dt = 2, so dy/dx = 2/(2t) = 1/t. At t = 1, gradient m = 1. Point: (1, 2). Tangent: y − 2 = 1(x − 1) ⇒ y = x + 1.

对于曲线 x = t², y = 2t,求 t = 1 处的切线。dx/dt = 2t, dy/dt = 2,所以 dy/dx = 2/(2t) = 1/t。t = 1 时,斜率 m = 1。点为 (1, 2)。切线为 y − 2 = 1(x − 1) ⇒ y = x + 1。

This step is common in exam questions, often combined with finding the normal line as well (gradient = −1/m).

这一步在考题中十分常见,通常还会结合求法线(斜率为 −1/m)。


8. The Second Derivative d²y/dx² | 二阶导数 d²y/dx²

To determine concavity or locate points of inflection, we need the second derivative. With parametric equations, d²y/dx² is NOT simply (d²y/dt²) / (d²x/dt²). The correct formula, derived from the chain rule, is:

要确定凹凸性或找拐点,就需要二阶导数。在参数方程中,d²y/dx² 不能简单地由 (d²y/dt²) / (d²x/dt²) 得到。正确的公式由链式法则导出,为:

d²y/dx² = (d/dt [dy/dx]) ÷ (dx/dt)

Alternatively, d²y/dx² = (d/dt [dy/dx]) / (dx/dt). This means we first obtain dy/dx as a function of t, differentiate it with respect to t, and then divide by dx/dt. A common mistake is to forget the division by dx/dt.

也就是说,我们首先求出用 t 表示的 dy/dx,并将其对 t 求导,再除以 dx/dt。常见的错误是忘记除以 dx/dt。

It is also possible to express d²y/dx² using the quotient rule on dx/dt and dy/dt, but the stepwise approach is safer and recommended by Edexcel mark schemes.

也可以对 dx/dt 和 dy/dt 使用商法则来推导 d²y/dx²,但逐步计算的方法更安全,也是 Edexcel 评分标准中推荐的做法。


9. Example 3 – Second Derivative Calculation | 例题 3:二阶导数计算

For the curve x = t² + 1, y = t³ − 3t, find d²y/dx² in terms of t.

对于曲线 x = t² + 1, y = t³ − 3t,求用 t 表示的 d²y/dx²。

First, dx/dt = 2t, dy/dt = 3t² − 3. Then dy/dx = (3t² − 3) / (2t) = (3(t² − 1))/(2t). Next, let u = dy/dx = (3t² − 3)/(2t). Differentiate u with respect to t: du/dt = d/dt [ (3t² − 3)/(2t) ] = [ (6t)(2t) − (3t² − 3)(2) ] / (4t²) = [12t² − 6t² + 6] / (4t²) = (6t² + 6) / (4t²) = (6(t² + 1))/(4t²) = (3(t² + 1))/(2t²). Then d²y/dx² = (du/dt) / (dx/dt) = [3(t² + 1)/(2t²)] / (2t) = 3(t² + 1)/(4t³).

首先,dx/dt = 2t,dy/dt = 3t² − 3。于是 dy/dx = (3t² − 3) / (2t) = (3(t² − 1))/(2t)。接下来,令 u = dy/dx = (3t² − 3)/(2t)。对 t 求导:du/dt = d/dt [ (3t² − 3)/(2t) ] = [ (6t)(2t) − (3t² − 3)(2) ] / (4t²) = [12t² − 6t² + 6] / (4t²) = (6t² + 6)/(4t²) = (6(t² + 1))/(4t²) = (3(t² + 1))/(2t²)。然后 d²y/dx² = (du/dt) / (dx/dt) = [3(t² + 1)/(2t²)] / (2t) = 3(t² + 1)/(4t³)。

This method can be applied to any parametric system, but careful algebraic simplification is key. For trigonometric cases, we often differentiate dy/dx using standard trig derivatives.

该方法适用于任何参数系统,但关键是细心的代数化简。对于含三角函数的情况,我们通常用标准三角导数对 dy/dx 求导。


10. Points of Horizontal and Vertical Tangency | 水平与铅垂切线的点

Parametric curves give us a clear way to identify special points by examining dx/dt and dy/dt. A horizontal tangent occurs where dy/dt = 0 but dx/dt ≠ 0. A vertical tangent occurs where dx/dt = 0 but dy/dt ≠ 0. If both derivatives vanish simultaneously, we may have a cusp or a point of self-intersection requiring further limit analysis.

参数曲线通过考察 dx/dt 和 dy/dt,能清晰识别特殊点。水平切线出现在 dy/dt = 0 且 dx/dt ≠ 0 处。铅垂切线则出现在 dx/dt = 0 且 dy/dt ≠ 0 处。若两个导数同时为零,可能出现尖点或自交点,需要进一步进行极限分析。

For x = t³ − 3t, y = t², we have dx/dt = 3t² − 3, dy/dt = 2t. Setting dy/dt = 0 gives t = 0 (horizontal tangent at (−3,0)). Setting dx/dt = 0 gives t = ±1. At t = 1, dy/dt = 2 ≠ 0, so vertical tangent at (−2,1). At t = −1, vertical tangent at (2,1).

对于 x = t³ − 3t, y = t²,有 dx/dt = 3t² − 3,dy/dt = 2t。令 dy/dt = 0 得 t = 0(水平切线在 (−3,0))。令 dx/dt = 0 得 t = ±1。t = 1 时 dy/dt = 2 ≠ 0,故铅垂切线在 (−2,1);t = −1 时铅垂切线在 (2,1)。

Edexcel exam questions frequently ask for the coordinates of points where the tangent is parallel to the x-axis or y-axis, testing this exact concept.

Edexcel 试题经常会要求找出切线平行于 x 轴或 y 轴的点坐标,直接考查这一概念。


11. Common Mistakes and How to Avoid Them | 常见错误与避免方法

  • Mistake 1: Using (dy/dt) / (dx/dt) but forgetting to check dx/dt ≠ 0, leading to invalid expressions at certain points.
  • 错误 1:使用 (dy/dt) / (dx/dt) 时忘记检查 dx/dt ≠ 0,导致在特定点得到无效表达式。
  • Mistake 2: For the second derivative, incorrectly writing (d²y/dt²) / (d²x/dt²) instead of using the proper chain rule formula.
  • 错误 2:对于二阶导数,错误地写成 (d²y/dt²) / (d²x/dt²),而不是使用正确的链式法则公式。
  • Mistake 3: Confusing the differentiation of trigonometric parametric functions; for instance, when x = a cos t, dx/dt = −a sin t, not a cos t.
  • 错误 3:混淆三角参数函数的求导,例如 x = a cos t 时 dx/dt = −a sin t,而不是 a cos t。
  • Mistake 4: Simplifying dy/dx too early before finding d²y/dx², which often makes differentiation messier. Keep dy/dx as a clear function of t before differentiating again.
  • 错误 4:在求 d²y/dx² 之前过早化简 dy/dx,往往使后续求导变得更繁琐。再次求导前应将 dy/dx 保留为清晰的 t 函数。
  • Mistake 5: Substituting the point coordinates directly into dy/dx before finding the parameter value that corresponds to that point.
  • 错误 5:在找到点对应的参数值之前,直接把点坐标代入 dy/dx。

By systematically writing dx/dt and dy/dt and following the two-step process for the second derivative, many of these pitfalls can be avoided.

只要系统地写出 dx/dt 和 dy/dt,并遵循求二阶导数的两步法,多数错误都能避免。


12. Exam-Style Question and Solution | 考题风格例题与解答

The curve C has parametric equations x = 2t + 1, y = t² − 4t + 3.

曲线 C 的参数方程为 x = 2t + 1, y = t² − 4t + 3。

(a) Find dy/dx in terms of t, simplifying your answer. (b) Hence find the equation of the tangent to C at the point where t = 2. (c) Find the value of t for which the tangent is parallel to the x-axis.

(a) 求用 t 表示的 dy/dx,并化简答案。(b) 由此求 C 在 t = 2 处的切线方程。(c) 求使切线平行于 x 轴的 t 值。

Solution: (a) dx/dt = 2, dy/dt = 2t − 4. So dy/dx = (2t − 4)/2 = t − 2. (b) At t = 2, x = 5, y = 4 − 8 + 3 = −1. Gradient m = 2 − 2 = 0. Tangent: y − (−1) = 0(x − 5) ⇒ y = −1 (horizontal line). (c) Tangent parallel to x-axis ⇒ dy/dx = 0 ⇒ t − 2 = 0 ⇒ t = 2.

解答:(a) dx/dt = 2, dy/dt = 2t − 4。故 dy/dx = (2t − 4)/2 = t − 2。(b) t = 2 时,x = 5, y = 4 − 8 + 3 = −1。斜率 m = 2 − 2 = 0。切线为 y − (−1) = 0(x − 5) ⇒ y = −1(水平线)。(c) 切线平行于 x 轴 ⇒ dy/dx = 0 ⇒ t − 2 = 0 ⇒ t = 2。

This question illustrates how parametric differentiation feeds directly into coordinate geometry, a frequent theme in Edexcel exams.

此题展示了参数求导如何直接与坐标几何衔接,这是 Edexcel 考试中的常见主题。

Published by TutorHao | Edexcel A-Level Mathematics Revision Series | aleveler.com

更多咨询请联系16621398022(同微信)

📞 咨询 / 微信:16621398022(同微信)
A-Level / IGCSE / IB / AP 课程辅导 · 真题资料 · 留学申请规划
查看联系方式 →

Comments

屏轩国际教育cambridge primary/secondary checkpoint, cat4, ukiset,ukcat,igcse,alevel,PAT,STEP,MAT, ibdp,ap,ssat,sat,sat2课程辅导,国外大学本科硕士研究生博士课程论文辅导

Turn on JavaScript to leave a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

咨询微信:16621398022(同微信) · 联系我们
Exit mobile version