Electricity for AQA A-Level Physics | AQA A-Level物理电学核心精讲

📚 Electricity for AQA A-Level Physics | AQA A-Level物理电学核心精讲

Electricity is one of the most important topics in AQA A-Level Physics, linking the behaviour of charged particles with the operation of circuits and components. This article covers the key definitions, equations, graphs and practical skills you need for the exam. You should be able to define current, potential difference, resistance and power, solve series and parallel circuits, and interpret I-V characteristics accurately.

电学是AQA A-Level物理中最重要的主题之一,它将带电粒子的行为与电路和元件的工作联系起来。本文涵盖考试所需的核心定义、方程、图像和实验技能。你应当能够定义电流、电势差、电阻和功率,求解串联与并联电路,并能准确解释 I-V 特性曲线。


1. Electric Current and Charge | 电流与电荷

Electric current is the rate of flow of charge. The average current I is given by I = ΔQ / Δt, where ΔQ is the charge passing a point in time Δt. The SI unit of current is the ampere (A), equal to one coulomb per second.

电流是电荷流动的速率。平均电流 I 由 I = ΔQ / Δt 给出,其中 ΔQ 是在时间 Δt 内通过某一点的电荷量。电流的国际单位是安培(A),等于每秒一库仑。

In metals, current is carried by free electrons moving through the lattice. Conventional current is defined in the opposite direction to electron flow, from the positive terminal to the negative terminal. Charge is quantised: the elementary charge e = 1.60 × 10⁻¹⁹ C, and any charge Q is an integer multiple of e, so Q = ne.

在金属中,电流由自由电子在晶格中移动形成。约定电流方向与电子流动方向相反,即从正极流向负极。电荷是量子化的:基本电荷 e = 1.60 × 10⁻¹⁹ C,任何电荷 Q 都是 e 的整数倍,即 Q = ne。

For example, if a current of 2.0 A flows for 5.0 s, the transferred charge is Q = I × t = 2.0 × 5.0 = 10 C.

例如,若 2.0 A 的电流持续 5.0 s,则转移的电荷为 Q = I × t = 2.0 × 5.0 = 10 C。


2. Potential Difference and Electromotive Force | 电势差与电动势

Potential difference (p.d.) between two points is the energy transferred per unit charge moving between them. It is defined as V = W / Q, where W is the work done or energy transferred and Q is the charge. The unit is the volt (V), and 1 V = 1 J C⁻¹.

电势差(p.d.)是两点之间移动单位电荷所转移的能量。它定义为 V = W / Q,其中 W 为做功或能量转移,Q 为电荷量。单位是伏特(V),且 1 V = 1 J C⁻¹。

Electromotive force (e.m.f.) of a source is the energy supplied per unit charge by the source to drive charge around a complete circuit. Although the name suggests a force, e.m.f. is a voltage.

Published by TutorHao | A-Level Physics Revision Series | aleveler.com

更多咨询请联系16621398022(同微信)

📞 咨询 / 微信:16621398022(同微信)
A-Level / IGCSE / IB / AP 课程辅导 · 真题资料 · 留学申请规划
查看联系方式 →

Comments

屏轩国际教育cambridge primary/secondary checkpoint, cat4, ukiset,ukcat,igcse,alevel,PAT,STEP,MAT, ibdp,ap,ssat,sat,sat2课程辅导,国外大学本科硕士研究生博士课程论文辅导

Turn on JavaScript to leave a comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

咨询微信:16621398022(同微信) · 联系我们
Exit mobile version