📚 Inverse Matrices | 逆矩阵
In AQA A-level Mathematics, inverse matrices are a central tool in linear algebra. They allow you to reverse a matrix transformation and to solve systems of simultaneous equations efficiently.
在 AQA A-level 数学中,逆矩阵是线性代数的核心工具。它可以逆转矩阵变换,并能高效求解线性方程组。
1. What is an Inverse Matrix? | 什么是逆矩阵?
For a square matrix A, the inverse matrix is written A⁻¹ and is defined by the conditions AA⁻¹ = A⁻¹A = I, where I is the identity matrix.
对于方阵 A,其逆矩阵记作 A⁻¹,定义条件是 AA⁻¹ = A⁻¹A = I,其中 I 是单位矩阵。
Only square matrices can have inverses, and not every square matrix is invertible. At A-level you will mostly work with 2×2 matrices, where the test for invertibility is simple.
只有方阵才可能有逆矩阵,且并非每个方阵都可逆。在 A-level 阶段你主要处理 2×2 矩阵,其可逆性判断非常简单。
2. The 2×2 Inverse Formula | 2×2 逆矩阵公式
If A is the 2×2 matrix given by
若 A 是如下 2×2 矩阵
A = [a b; c d]
then the determinant is
则其行列式为
det(A) = ad − bc
Provided det(A) ≠ 0, the inverse is
当 det(A) ≠ 0 时,其逆矩阵为
A⁻¹ = 1/(ad − bc) [d −b; −c a]
You can remember this as: swap the main diagonal entries a and d, change the signs of the off-diagonal entries b and c, then divide by the determinant.
你可以这样记:交换主对角线元素 a 和 d,改变副对角线元素 b 和 c 的符号,然后除以行列式。
3. Determinant and Singular Matrices | 行列式与奇异矩阵
The determinant decides whether an inverse exists. If det(A) = 0, the matrix is called singular and has no inverse.
行列式决定逆矩阵是否存在。若 det(A) = 0,该矩阵称为奇异矩阵,没有逆矩阵。
If det(A) ≠ 0, the matrix is non-singular and A⁻¹ exists. Geometrically, a zero determinant means the transformation collapses the plane onto a line or a point, so information is lost and the process cannot be reversed.
若 det(A) ≠ 0,该矩阵为非奇异矩阵,A⁻¹ 存在。从几何上看,行列式为零意味着变换将平面压缩到一条直线或一个点,信息丢失,因此过程不可逆。
4. Verifying an Inverse | 验证逆矩阵
To check that a candidate matrix B is really A⁻¹, calculate both AB and BA. Each product must equal the identity matrix
若要检验某个候选矩阵 B 确实是 A⁻¹,需要计算 AB 和 BA。两个乘积都必须等于单位矩阵
I = [1 0; 0 1]
In a 2×2 case, showing AB = I is often enough if A is known to be non-singular, but showing both products is safer in an exam.
在 2×2 情形中,如果已知 A 非奇异,通常只需证明 AB = I 即可,但在考试中同时验证两个乘积更稳妥。
5. Properties of Inverse Matrices | 逆矩阵的性质
Inverse matrices obey several useful rules:
逆矩阵满足以下几条常用规则:
(A⁻¹)⁻¹ = A
(AB)⁻¹ = B⁻¹A⁻¹
(Aᵀ)⁻¹ = (A⁻¹)ᵀ
(kA)⁻¹ = (1/k) A⁻¹, k ≠ 0
det(A⁻¹) = 1/det(A)
Note the reversed order in the inverse of a product: the inverse of AB is B⁻¹A⁻¹, not A⁻¹B⁻¹.
注意乘积逆矩阵的顺序是反向的:AB 的逆为 B⁻¹A⁻¹,而不是 A⁻¹B⁻¹。
6. Solving Matrix Equations | 解矩阵方程
If A is invertible and AX = B, you can multiply both sides on the left by A⁻¹ to obtain
若 A 可逆且 AX = B,你可以在两边同时左乘 A⁻¹,得到
X = A⁻¹B
If the equation is XA = B instead, you must multiply on the right:
如果方程是 XA = B,则必须右乘:
X = BA⁻¹
Because matrix multiplication is not commutative, multiplying on the correct side is essential.
由于矩阵乘法不可交换,在正确的一侧相乘非常重要。
7. Using the Inverse for Simultaneous Equations | 用逆矩阵解线性方程组
A system of equations such as ax + by = e and cx + dy = f can be written in matrix form as
形如 ax + by = e 与 cx + dy = f 的方程组可以写成矩阵形式
A [x; y] = [e; f]
where A = [a b; c d]. If det(A) ≠ 0, multiply both sides on the left by A⁻¹ to get
其中 A = [a b; c d]。若 det(A) ≠ 0,两边同时左乘 A⁻¹,可得
[x; y] = A⁻¹ [e; f]
This gives the unique solution. When det(A) = 0, the system does not have a unique solution.
这样就得到了唯一解。当 det(A) = 0 时,方程组没有唯一解。
8. Inverse of a Product | 乘积的逆
The rule (AB)⁻¹ = B⁻¹A⁻¹ can be proved using the associative law. Consider
规则 (AB)⁻¹ = B⁻¹A⁻¹ 可以用结合律证明。考虑下式
(AB)(B⁻¹A⁻¹) = A(BB⁻¹)A⁻¹ = AIA⁻¹ = AA⁻¹ = I
Because the product gives the identity matrix, B⁻¹A⁻¹ is indeed the inverse of AB.
因为乘积得到单位矩阵,所以 B⁻¹A⁻¹ 确实是 AB 的逆矩阵。
9. Geometric Interpretation | 几何解释
A 2×2 matrix represents a linear transformation of the plane. Its inverse matrix represents the reverse transformation, sending images back to their original positions.
2×2 矩阵表示平面的线性变换。其逆矩阵表示逆变换,将像点送回到原来的位置。
For example, if A represents a rotation or a reflection, A⁻¹ represents the opposite rotation or the same reflection applied again. If the determinant is zero, the transformation cannot be reversed.
例如,若 A 表示旋转或反射,A⁻¹ 就表示相反的旋转或再次施加相同的反射。若行列式为零,变换无法逆转。
10. Common Mistakes | 常见错误
-
Forgetting to divide by the determinant when writing A⁻¹.
写 A⁻¹ 时忘记除以行列式。
-
Swapping the off-diagonal entries instead of only changing their signs.
将副对角线元素交换位置,而不是仅改变符号。
-
Using A⁻¹B⁻¹ instead of B⁻¹A⁻¹ for the inverse of AB.
把 AB 的逆写成 A⁻¹B⁻¹,而正确形式是 B⁻¹A⁻¹。
-
Multiplying by A⁻¹ on the wrong side when solving XA = B.
在解 XA = B 时在错误的一侧乘以 A⁻¹。
11. Worked Example | 例题
Let A = [3 4; 1 2]. First calculate the determinant:
设 A = [3 4; 1 2]。先计算行列式:
det(A) = 3 × 2 − 4 × 1 = 2
Since det(A) ≠ 0, the inverse exists:
由于 det(A) ≠ 0,逆矩阵存在:
A⁻¹ = 1/2 [2 −4; −1 3] = [1 −2; −0.5 1.5]
To verify, multiply:
验证乘法:
AA⁻¹ = [3 4; 1 2] [1 −2; −0.5 1.5] = [1 0; 0 1]
Now solve the simultaneous equations 3x + 4y = 10 and x + 2y = 4:
现在解方程组 3x + 4y = 10 和 x + 2y = 4:
[x; y] = A⁻¹ [10; 4] = [1 −2; −0.5 1.5] [10; 4] = [2; 1]
Therefore x = 2 and y = 1.
因此 x = 2,y = 1。
12. Exam Tips | 考试技巧
-
Always state the determinant first and check that it is non-zero before finding A⁻¹.
在求 A⁻¹ 之前,务必先写出行列式并确认它不为零。
-
Write the full formula in your working; method marks are often available even if an arithmetic slip occurs.
在解题过程中写出完整公式;即使出现计算错误,也可能获得方法分。
-
Check your inverse by multiplying it by the original matrix when time allows.
时间允许时,用原矩阵乘逆矩阵进行检验。
-
Give exact answers using fractions where possible, unless the question asks for decimals.
除非题目要求小数,否则尽可能用分数给出精确答案。
Published by TutorHao | Mathematics Revision Series | aleveler.com
更多咨询请联系16621398022(同微信)
屏轩国际教育cambridge primary/secondary checkpoint, cat4, ukiset,ukcat,igcse,alevel,PAT,STEP,MAT, ibdp,ap,ssat,sat,sat2课程辅导,国外大学本科硕士研究生博士课程论文辅导