Combined Transformations | 组合变换

📚 Combined Transformations | 组合变换

Combined transformations in A-Level Mathematics describe how you can apply two or more translations, reflections, stretches, or compressions to the graph of a function. Understanding them is essential for solving problems in pure mathematics, sketching graphs, and analysing functions in applied contexts. In Edexcel A-Level exams, straightforward questions often ask you to give the equation of a transformed graph or state the transformations in a specific order.

在A-Level数学中,组合变换描述如何对一个函数图像依次应用两个或更多个平移、反射、伸缩或压缩。理解组合变换对于解决纯数学问题、绘制函数图像以及在应用背景下分析函数都至关重要。在Edexcel A-Level考试中,基础题目通常要求你写出变换后的图像方程,或按指定顺序说明变换过程。


1. The Four Basic Transformations | 四种基本变换

Before combining transformations, you must be completely confident with the four basic types. The table below summarises the effect of each transformation on the graph of ( y = f(x) ).

在组合变换之前,你必须对四种基本变换完全熟悉。下表总结了每种变换对 ( y = f(x) ) 图像的影响。

Transformation Effect 中文解释
( y = f(x) + a ) Vertical translation by ( a ) units 向上(( a>0 ))或向下(( a<0 ))平移 ( a ) 个单位
( y = f(x + a) ) Horizontal translation by ( -a ) units 向左(( a>0 ))或向右(( a<0 ))平移 ( |a| ) 个单位
( y = -f(x) ) Reflection in the x-axis 关于 x 轴反射
( y = f(-x) ) Reflection in the y-axis 关于 y 轴反射
( y = a f(x) ) Vertical stretch by factor ( a ) 纵向伸展 ( a ) 倍;若 ( a<0 ) 则还包含 x 轴反射
( y = f(ax) ) Horizontal stretch by factor ( frac{1}{a} ) 横向压缩或伸展 ( frac{1}{a} ) 倍;若 ( a<0 ) 则还包含 y 轴反射

2. Reading Combined Transformations from an Equation | 从方程识别组合变换

When you see an equation such as ( y = a f(bx + c) + d ), the key is to rearrange the horizontal part first. Factorise the coefficient of ( x ) inside the brackets so that the expression has the form ( f(b(x – h)) ). The transformed function can then be written as:

当你看到 ( y = a f(bx + c) + d ) 这样的方程时,关键是要先整理水平方向的部分。把括号内部 ( x ) 的系数提出来,使表达式变为 ( f(b(x – h)) ) 的形式。这样变换后的函数就可以写成:

( y = a f(b(x – h)) + d )

Here, ( a ) controls vertical stretch, ( d ) controls vertical translation, ( b ) controls horizontal stretch, and ( h ) controls horizontal translation. This form makes it easy to identify all transformations at once.

其中,( a ) 控制纵向伸缩,( d ) 控制纵向平移,( b ) 控制横向伸缩,( h ) 控制横向平移。这种形式可以让你一眼看出所有变换。


3. The Golden Rule: Multiplication Before Addition | 黄金法则:先乘后加

For transformations on the same axis, the order matters. The golden rule is: when a stretch/reflection and a translation are both present, apply the stretch/reflection first, then the translation. This applies separately to the x-direction and the y-direction.

对于同一轴上的变换,顺序非常重要。黄金法则是:当伸缩/反射和平移同时出现时,先进行伸缩/反射,再进行平移。这一点对 x 方向和 y 方向分别适用。

For example, ( y = 2f(x) + 3 ) means: first stretch vertically by factor 2, then translate up 3 units. In contrast, ( y = 2(f(x) + 3) ) means: first translate up 3 units, then stretch vertically by factor 2. These produce different graphs.

例如,( y = 2f(x) + 3 ) 表示:先纵向伸展 2 倍,再向上平移 3 个单位。而 ( y = 2(f(x) + 3) ) 表示:先向上平移 3 个单位,再纵向伸展 2 倍。这两种情况得到的图像是不同的。


4. Horizontal Transformations: Factorise First | 水平变换:先提取因子

A very common mistake is to apply a horizontal translation before the horizontal stretch when the equation is not factorised. For example, consider ( y = f(2x – 6) ). Some students incorrectly describe this as ‘a horizontal stretch by ( frac{1}{2} ), then a translation right by 6’. This is wrong.

一个非常常见的错误是:在没有提取因子时,就先进行水平平移再进行水平拉伸。例如,考虑 ( y = f(2x – 6) )。有些学生错误地描述为“横向压缩 ( frac{1}{2} ),然后向右平移 6 个单位”。这是错误的。

The correct approach is to factorise: ( y = f(2(x – 3)) ). Therefore the correct sequence is: first a horizontal stretch by factor ( frac{1}{2} ), then a translation right by 3 units.

正确的做法是先提取因子:( y = f(2(x – 3)) )。因此正确的变换顺序是:先横向压缩为原来的 ( frac{1}{2} ),再向右平移 3 个单位。

Always rewrite ( f(bx + c) ) as ( f(b(x – h)) ) before describing transformations.

在描述变换前,一定要把 ( f(bx + c) ) 改写成 ( f(b(x – h)) )。


5. Worked Example 1: Describing a Sequence | 例题1:描述变换顺序

Let ( f(x) = x^2 ). Describe a sequence of transformations that maps ( y = f(x) ) to ( y = 3f(x – 2) + 4 ).

设 ( f(x) = x^2 )。请描述将 ( y = f(x) ) 变换到 ( y = 3f(x – 2) + 4 ) 的变换顺序。

Step 1: The horizontal shift is inside the function: ( f(x – 2) ), which is a translation right by 2 units.

第1步:水平平移在函数内部:( f(x – 2) ) 表示向右平移 2 个单位。

Step 2: The coefficient 3 gives a vertical stretch by factor 3.

第2步:系数 3 表示纵向伸展 3 倍。

Step 3: The final +4 gives a translation up by 4 units.

第3步:最后的 +4 表示向上平移 4 个单位。

Because there is only one horizontal transformation, and the vertical stretch happens before the vertical translation, the full sequence is:

因为水平方向只有一个变换,且纵向伸展发生在纵向平移之前,所以完整的变换顺序是:

Translate right by 2 → vertical stretch by 3 → translate up by 4.

向右平移2个单位 → 纵向伸展3倍 → 向上平移4个单位。


6. Worked Example 2: Using the Factorised Form | 例题2:利用提取因子后的形式

Describe a sequence of transformations that maps ( y = sin x ) to ( y = 3 sin(2x – pi) + 1

Published by TutorHao | A-Level Revision Series | aleveler.com

更多咨询请联系16621398022(同微信)

📞 咨询 / 微信:16621398022(同微信)
A-Level / IGCSE / IB / AP 课程辅导 · 真题资料 · 留学申请规划
查看联系方式 →

Comments

屏轩国际教育cambridge primary/secondary checkpoint, cat4, ukiset,ukcat,igcse,alevel,PAT,STEP,MAT, ibdp,ap,ssat,sat,sat2课程辅导,国外大学本科硕士研究生博士课程论文辅导

This site uses Akismet to reduce spam. Learn how your comment data is processed.

咨询微信:16621398022(同微信) · 联系我们