Positional Relationships Between Lines in a Plane | 平面中直线间的位置关系判定

📚 Positional Relationships Between Lines in a Plane | 平面中直线间的位置关系判定

In coordinate geometry, two lines in a plane can be related in exactly one of three ways: they are parallel, they intersect at a single point, or they coincide completely. Determining which of these relationships holds is a fundamental skill that appears constantly in the IB Mathematics curriculum, from linear functions to systems of equations and vector geometry.

在平面解析几何中,两条直线的位置关系只有三种可能:平行、相交于一点或完全重合。判定这些关系是 IB 数学课程中的基础技能,在函数、方程组以及向量几何中都会频繁出现。


1. Key Definitions | 核心定义回顾

Before we can judge the positional relationship between two lines, we must recall the standard forms of a straight line. The most common forms are the slope–intercept form ( y = mx + c ) and the general form ( Ax + By + C = 0 ). Both forms carry the same geometric information, but each has its own advantages when analysing relationships.

在判断两条直线的位置关系之前,我们需要回顾直线方程的两种常见形式:斜截式 ( y = mx + c ) 和一般式 ( Ax + By + C = 0 )。这两种形式蕴含相同的几何信息,但在分析位置关系时各有优势。

For the slope–intercept form, the coefficient ( m ) represents the gradient (slope) of the line, and ( c ) represents the y-intercept. For the general form, the gradient can be extracted as ( m = -frac{A}{B} ) provided ( B neq 0 ).

对于斜截式,系数 ( m ) 表示直线的斜率,( c ) 表示直线在 y 轴上的截距;对于一般式,当 ( B neq 0 ) 时,斜率可表示为 ( m = -frac{A}{B} )。

Line 1: y = m₁x + c₁  |  Line 2: y = m₂x + c₂

When using the general form, we write:

当使用一般式时,我们写为:

L₁: A₁x + B₁y + C₁ = 0  and  L₂: A₂x + B₂y + C₂ = 0


2. Parallel Lines | 平行直线的判定

Two non-vertical lines are parallel if and only if they have exactly the same gradient. That is, if ( m_1 = m_2 ), then the lines are either parallel or coincident. To distinguish between these two cases, we compare their y-intercepts: if ( c_1 neq c_2 ), the lines are distinct parallel lines; if ( c_1 = c_2 ), they are the same line.

两条非竖直直线平行的充要条件是它们的斜率相等。也就是说,若 ( m_1 = m_2 ),则这两条直线要么平行、要么重合。要区分这两种情况,需要比较它们的 y 截距:若 ( c_1 neq c_2 ),则为两条不同的平行直线;若 ( c_1 = c_2 ),则它们重合为同一条直线。

In the general form, two lines ( A_1x + B_1y + C_1 = 0 ) and ( A_2x + B_2y + C_2 = 0 ) are parallel if and only if:

对于一般式,两条直线 ( A_1x + B_1y + C_1 = 0 ) 与 ( A_2x + B_2y + C_2 = 0 ) 平行的充要条件是:

A₁B₂ − A₂B₁ = 0 and A₁C₂ − A₂C₁ ≠ 0

This condition can be remembered as the proportionality of the coefficients of ( x ) and ( y ), but not including the constant term.

这个条件可以记忆为:x 与 y 的系数成比例,但常数项不成比例。

Example 1 | 例 1: Determine whether the lines ( y = 3x + 2 ) and ( y = 3x – 5 ) are parallel.

例 1:判断直线 ( y = 3x + 2 ) 与 ( y = 3x – 5 ) 是否平行。

Both lines have gradient ( m = 3 ), so they have the same slope. Since their y-intercepts differ (( c_1 = 2 ), ( c_2 = -5 )), the lines are distinct and therefore parallel.

两条直线的斜率都为 ( m = 3 ),斜率相同。由于 y 截距不同(( c_1 = 2 ),( c_2 = -5 )),所以两条直线不同,因此平行。


3. Perpendicular Lines | 垂直直线的判定

Two lines are perpendicular if the product of their gradients equals (-1). More precisely, for two non-vertical lines with gradients ( m_1 ) and ( m_2 ), the condition for perpendicularity is:

两条直线垂直当且仅当它们斜率的乘积等于 (-1)。更准确地说,对于斜率分别为 ( m_1 ) 和 ( m_2 ) 的两条非竖直直线,垂直的条件是:

m₁ × m₂ = −1  or equivalently  m₂ = −1 / m₁

If one line is vertical (( x = a )) and the other is horizontal (( y = b )), they are automatically perpendicular.

如果一条直线是竖直的(( x = a )),另一条是水平的(( y = b )),则它们必定垂直。

In the general form, the condition for perpendicularity is:

对于一般式,垂直的条件是:

A₁A₂ + B₁B₂ = 0

This elegant condition comes from the dot product of the two normal vectors ( (A₁, B₁) ) and ( (A₂, B₂) ) being zero.

这一简洁条件来自于两个法向量 ( (A₁, B₁) ) 与 ( (A₂, B₂) ) 的点积为零。

Example 2 | 例 2: Show that ( y = frac{1}{2}x + 3 ) and ( y = -2x + 1 ) are perpendicular.

例 2:证明 ( y = frac{1}{2}x + 3 ) 与 ( y = -2x + 1 ) 垂直。

Here ( m_1 = frac{1}{2} ) and ( m_2 = -2 ). Their product is ( frac{1}{2} times (-2) = -1 ), so the lines are perpendicular.

这里 ( m_1 = frac{1}{2} ),( m_2 = -2 )。它们的乘积为 ( frac{1}{2} times (-2) = -1 ),因此两条直线垂直。


4. Intersecting Lines | 相交直线的判定

Two lines intersect at a single point if they are neither parallel nor coincident. In terms of gradients, this occurs when ( m_1 neq m_2 ). When this condition holds, we can find the unique intersection point by solving the two linear equations simultaneously.

两条直线既不平行也不重合时,它们相交于唯一一点。用斜率表示,即 ( m_1 neq m_2 )。当这一条件成立时,我们可以通过联立两个线性方程来求唯一的交点。

For example, given the lines ( y = 2x + 1 ) and ( y = -x + 4 ), setting the right-hand sides equal gives:

例如,给定直线 ( y = 2x + 1 ) 与 ( y = -x + 4 ),令右边相等:

2x + 1 = −x + 4  ⇒  3x = 3  ⇒  x = 1

Substituting ( x = 1 ) into either equation gives ( y = 3 ). Thus the intersection point is ( (1, 3) ).

将 ( x = 1 ) 代入任一方程得 ( y = 3 )。因此交点坐标为 ( (1, 3) )。

In the general form, the condition for a unique intersection is ( A_1B_2 – A_2B_1 neq 0 ), which ensures that the coefficient matrix of the system is invertible.

在一般式中,有唯一交点的条件是 ( A_1B_2 – A_2B_1 neq 0 ),这保证了方程组的系数矩阵可逆。


5. Coincident Lines | 重合直线的判定

Two lines coincide when they have the same gradient and the same y-intercept. In other words, every point on one line lies on the other. This happens when one equation is a scalar multiple of the other.

两条直线重合时,它们的斜率相同且 y 截距相同。也就是说,一条直线上的每一个点都在另一条直线上。此时,一个方程是另一个方程的标量倍。

For the general forms ( A_1x + B_1y + C_1 = 0 ) and ( A_2x + B_2y + C_2 = 0 ), the condition for coincidence is:

对于一般式 ( A_1x + B_1y + C_1 = 0 ) 与 ( A_2x + B_2y + C_2 = 0 ),重合的条件是:

A₁/A₂ = B₁/B₂ = C₁/C₂

provided none of the denominators is zero. Equivalently, there exists a non-zero constant ( k ) such that ( A_1 = kA_2 ), ( B_1 = kB_2 ), and ( C_1 = kC_2 ).

其中分母均不为零。等价地说,存在非零常数 ( k ),使得 ( A_1 = kA_2 ),( B_1 = kB_2 ),且 ( C_1 = kC_2 )。

Example 3 | 例 3: Determine whether the lines ( 2x + 4y – 6 = 0 ) and ( x + 2y – 3 = 0 ) are coincident.

例 3:判断直线 ( 2x + 4y – 6 = 0 ) 与 ( x + 2y – 3 = 0 ) 是否重合。

Observe that the first equation is exactly twice the second equation. Therefore the two lines are coincident.

观察可知,第一个方程恰好是第二个方程的两倍,因此这两条直线重合。


6. Summary Table | 判定方法汇总表

The following table summarises all the criteria discussed above for quick reference during revision.

下表汇总了以上讨论的所有判定准则,方便复习时快速查阅。

Relationship 条件(斜率形式) Condition (General Form)
Distinct Parallel m₁ = m₂
c₁ ≠ c₂
A₁B₂ − A₂B₁ = 0
A₁C₂ − A₂C₁ ≠ 0
Coincident m₁ = m₂
c₁ = c₂
A₁/A₂ = B₁/B₂ = C₁/C₂
Intersecting m₁ ≠ m₂ A₁B₂ − A₂B₁ ≠ 0
Perpendicular m₁ · m₂ = −1 A₁A₂ + B₁B₂ = 0

7. Solving Systems of Linear Equations | 线性方程组的求解视角

The positional relationship between two lines is intimately connected to the solution set of a system of two linear equations. A unique solution corresponds to intersecting lines; no solution corresponds to distinct parallel lines; infinitely many solutions correspond to coincident lines.

两条直线的位置关系与二元线性方程组的解集密切相关:唯一解对应相交直线;无解对应不同的平行直线;无穷多解对应重合直线。

Consider the system:

考虑方程组:

a₁x + b₁y = c₁
a₂x + b₂y = c₂

We can use the ratio method to classify the system without solving it explicitly. Let:

我们可以用比例法不加求解直接对系统进行分类。设:

  • If ( frac{a_1}{a_2} neq frac{b_1}{b_2} ), the system has a unique solution (intersecting lines).

  • If ( frac{a_1}{a_2} = frac{b_1}{b_2} neq frac{c_1}{c_2} ), the system has no solution (distinct parallel lines).

  • If ( frac{a_1}{a_2} = frac{b_1}{b_2} = frac{c_1}{c_2} ), the system has infinitely many solutions (coincident lines).

If 若 ( a_1/a_2 neq b_1/b_2 ),方程组有唯一解(相交直线)。

若 ( a_1/a_2 = b_1/b_2 neq c_1/c_2 ),方程组无解(两不同平行直线)。

若 ( a_1/a_2 = b_1/b_2 = c_1/c_2 ),方程组有无穷多解(重合直线)。

This ratio test is particularly useful in exam situations because it is fast and does not require full algebraic manipulation.

比例法在考试中特别实用,因为它速度快且不需要完整的代数运算。


8. Applications in Coordinate Geometry Problems | 在解析几何问题中的应用

These positional relationships are not just theoretical; they form the backbone of many exam-style problems. For instance, you may be asked to find the equation of a line passing through a given point and parallel to another line, or to find the equation of a perpendicular bisector of a segment.

这些位置关系不仅仅是理论,它们构成许多考试题型的基础。例如,你可能需要求过某点且平行于已知直线的方程,或者求一条线段的垂直平分线方程。

Example 4 | 例 4: Find the equation of the line through the point ( (2, -1) ) and perpendicular to the line ( 3x – 2y = 5 ).

例 4:求过点 ( (2, -1) ) 且垂直于直线 ( 3x – 2y = 5 ) 的直线方程。

First, rewrite the given line in slope form: ( y = frac{3}{2}x – frac{5}{2} ). Its gradient is ( m_1 = frac{3}{2} ). A perpendicular line has gradient ( m_2 = -frac{2}{3} ). Using the point-slope form:

首先将已知直线化为斜截式:( y = frac{3}{2}x – frac{5}{2} ),其斜率为 ( m_1 = frac{3}{2} )。垂直直线的斜率为 ( m_2 = -frac{2}{3} )。使用点斜式:

y − (−1) = −(2/3)(x − 2)  ⇒  y + 1 = −(2/3)x + 4/3

⇒  y = −(2/3)x + 1/3

Alternatively, in general form: ( 2x + 3y – 1 = 0 ).

或者化为一般式:( 2x + 3y – 1 = 0 )。


9. Distance Between Parallel Lines | 平行线间的距离

An important related concept is the distance between two distinct parallel lines. If the lines are given in general form ( Ax + By + C_1 = 0 ) and ( Ax + By + C_2 = 0 ), the distance ( d ) between them is:

一个相关的重要概念是两条平行直线之间的距离。如果两条平行直线以一般式给出:( Ax + By + C_1 = 0 ) 与 ( Ax + By + C_2 = 0 ),则它们之间的距离 ( d ) 为:

d = |C₁ − C₂| / √(A² + B²)

This formula is derived from the perpendicular distance from a point to a line and is frequently tested in IB papers.

该公式由点到直线的垂直距离推导而来,在 IB 考试中经常出现。

Example 5 | 例 5: Find the distance between the lines ( 3x + 4y + 5 = 0 ) and ( 3x + 4y – 10 = 0 ).

例 5:求直线 ( 3x + 4y + 5 = 0 ) 与 ( 3x + 4y – 10 = 0 ) 之间的距离。

Using the formula with ( A = 3 ), ( B = 4 ), ( C_1 = 5 ), ( C_2 = -10 ):

代入公式,其中 ( A = 3 ),( B = 4 ),( C_1 = 5 ),( C_2 = -10 ):

d = |5 − (−10)| / √(3² + 4²) = 15 / 5 = 3

Thus the distance is 3 units.

因此距离为 3 个单位。


10. Common Pitfalls and Exam Tips | 常见易错点与考试提示

Students often make errors when they compare gradients without first converting both lines to the same form. To avoid this, always write equations in a consistent format before applying any criteria.

学生常犯的错误是不先将两条直线化为相同形式就直接比较斜率。为避免此类错误,在应用任何准则之前,务必先将方程写成一致的格式。

  • Vertical lines | 竖直直线:Do not attempt to use slope for vertical lines, as their gradient is undefined. Instead, compare their x-equations directly.

  • Fractional coefficients | 分数系数:When using the general form condition ( A_1B_2 – A_2B_1 = 0 ), be careful not to lose minus signs.

  • Check coincidence first | 先检查是否重合:When slopes are equal, do not immediately conclude “parallel”; verify whether the intercepts also match.

竖直直线的斜率不存在,因此不要用斜率来处理竖直直线,而应直接比较它们的 x 方程。在使用一般式条件 ( A_1B_2 – A_2B_1 = 0 ) 时,注意不要遗漏负号。当斜率相等时,不要立即断定”平行”,还需检查截距是否也相等。

In exam conditions, always sketch a quick graph to visualise the situation. Even a rough sketch can help confirm whether your algebraic conclusion is reasonable.

考试时,不妨快速绘制示意图来辅助理解。即使是粗略的草图,也能帮助确认你的代数结论是否合理。


11. Worked Exam-Style Problem | 考试风格典型例题

The following problem integrates several concepts from this article.

下面的例题整合了本文中的多个概念。

Problem | 题目:The lines ( L_1 ) and ( L_2 ) are given by ( 2x – 3y + 6 = 0 ) and ( 4x – 6y – 12 = 0 ). Determine whether the lines are parallel, coincident, or intersecting. If they are parallel, find the distance between them.

题目:已知直线 ( L_1 ) 和 ( L_2 ) 分别为 ( 2x – 3y + 6 = 0 ) 与 ( 4x – 6y – 12 = 0 )。判断它们是平行、重合还是相交。若平行,求它们之间的距离。

Solution | 解答:Rewrite both in slope form. For ( L_1 ): ( y = frac{2}{3}x + 2 ). For ( L_2 ): ( y = frac{2}{3}x – 2 ). Both have gradient ( frac{2}{3} ), but y-intercepts are ( 2 ) and ( -2 ), respectively. Therefore the lines are distinct parallel lines. To use the distance formula, we need matching coefficients in the general form. Divide the second equation by 2: ( 2x – 3y – 6 = 0 ). Thus:

解答:将两直线化为斜截式。( L_1 ) 为 ( y = frac{2}{3}x + 2 ),( L_2 ) 为 ( y = frac{2}{3}x – 2 )。两者斜率均为 ( frac{2}{3} ),但 y 截距分别为 2 和 -2,因此它们是两条不同的平行直线。要使用距离公式,需要使一般式中的系数一致。将第二个方程除以 2:( 2x – 3y – 6 = 0 )。于是:

d = |6 − (−6)| / √(2² + (−3)²) = 12 / √13

Thus the distance between the two lines is ( frac{12}{sqrt{13}} ) units.

由此,两条直线之间的距离为 ( frac{12}{sqrt{13}} ) 个单位。


12. Final Checklist | 最终自查清单

Use the following checklist to ensure you have mastered all essential skills from this article.

使用以下自查清单,确保你已掌握本文的所有核心技能。

  • I can determine whether two lines are parallel, intersecting, coincident, or perpendicular.

  • I can apply the slope conditions ( m_1 = m_2 ), ( m_1 neq m_2 ), and ( m_1 m_2 = -1 ) correctly.

  • I can use the general form conditions ( A_1B_2 – A_2B_1 = 0 ) and ( A_1A_2 + B_1B_2 = 0 ).

  • I can classify systems of linear equations as having one, none, or infinitely many solutions.

  • I can compute the distance between two parallel lines using the appropriate formula.

我能判断两条直线是平行、相交、重合还是垂直。我能正确应用斜率条件 ( m_1 = m_2 )、( m_1 neq m_2 ) 以及 ( m_1 m_2 = -1 )。我能使用一般式条件 ( A_1B_2 – A_2B_1 = 0 ) 和 ( A_1A_2 + B_1B_2 = 0 )。我能将线性方程组分类为唯一解、无解或无穷多解。我能运用相应公式计算两条平行线之间的距离。

Published by TutorHao | Mathematics Revision Series | aleveler.com

更多咨询请联系16621398022(同微信)

📞 咨询 / 微信:16621398022(同微信)
A-Level / IGCSE / IB / AP 课程辅导 · 真题资料 · 留学申请规划
查看联系方式 →

Comments

屏轩国际教育cambridge primary/secondary checkpoint, cat4, ukiset,ukcat,igcse,alevel,PAT,STEP,MAT, ibdp,ap,ssat,sat,sat2课程辅导,国外大学本科硕士研究生博士课程论文辅导

This site uses Akismet to reduce spam. Learn how your comment data is processed.

咨询微信:16621398022(同微信) · 联系我们