Quadratic Modelling – Example 2.6.2 | 二次函数建模例题 2.6.2 精讲

📚 Quadratic Modelling – Example 2.6.2 | 二次函数建模例题 2.6.2 精讲

Example 2.6.2 in the AQA A-Level Mathematics Year 1 course explores how a real-world situation can be converted into a quadratic model, and how completing the square reveals its maximum value. This is one of the most frequently tested modelling skills in Pure Mathematics Paper 1.

AQA 数学一年级课程中的例题 2.6.2 展示了如何将实际问题转化为二次函数模型,并运用配方法求出其最大值。这是纯数学试卷一中最常考查的建模技能之一。

1. The Problem | 题目重现

Suppose a farmer has 80 metres of fencing and wishes to form a rectangular enclosure along a straight river bank. The side along the river needs no fencing. Let the width of the enclosure be x metres and the length along the river be L metres.

假设某农夫有 80 米篱笆,想沿平直的河岸围出一块矩形场地。临河的一边不需要篱笆。设场地的宽度(垂直于河岸)为 x 米,沿河方向的长度为 L 米。

The question asks: which width x produces the largest possible area for the enclosure?

题目要求:宽度 x 取何值时,围场面积最大?


2. Expressing the Constraint | 建立约束关系

Because only three sides are fenced, the total length of fencing satisfies 2x + L = 80.

由于只需围三边,篱笆总长满足 2x + L = 80。

2x + L = 80 → L = 80 − 2x

The domain is restricted: x > 0 and L > 0 together give 0 < x < 40.

定义域受到限制:x > 0 且 L > 0,可得 0 < x < 40。


3. Building the Area Function | 构建面积函数

The area A of a rectangle is width multiplied by length:

矩形面积 A 等于宽乘以长:

A = x × L = x(80 − 2x) = 80x − 2x²

This quadratic has a negative coefficient of x², so its graph is a downward-opening parabola and therefore possesses a maximum value.

该二次函数的 x² 项系数为负,因此图像是开口向下的抛物线,所以必定存在最大值。


4. Completing the Square | 配方求解

To locate the maximum, rewrite A in completed-square form:

为了求出最大值,将 A 写成顶点式:

A = x(80 − 2x) = −2x² + 80x = −2(x − 20)² + 800

The step-by-step working is shown below:

下面逐步展示计算过程:

  • Factor out −2: A = −2(x² − 40x)

    提取公因数 −2:A = −2(x² − 40x)

  • Complete the square inside: x² − 40x = (x − 20)² − 400

    对内层配方:x² − 40x = (x − 20)² − 400

  • Multiply back: A = −2[(x − 20)² − 400] = −2(x − 20)² + 800

    代回并展开:A = −2[(x − 20)² − 400] = −2(x − 20)² + 800


5. Interpreting the Vertex | 解读顶点

In the form A = −2(x − 20)² + 800, the vertex of the parabola occurs at x = 20. Since (x − 20)² ≥ 0 for every real x, the term −2(x − 20)² is at most 0.

在 A = −2(x − 20)² + 800 中,抛物线的顶点位于 x = 20 处。由于 (x − 20)² ≥ 0 对所有实数 x 恒成立,所以 −2(x − 20)² 的最大值为 0。

Therefore, the maximum area is A = 800 m² when x = 20 m.

因此,当 x = 20 米时,最大面积为 A = 800 平方米。

The corresponding length is L = 80 − 2 × 20 = 40 m.

对应的长度为 L = 80 − 2 × 20 = 40 米。


6. Verification | 验证结果

Test a few values in the model to confirm that x = 20 is sensible.

在模型中代入几个数值,检验 x = 20 是否合理。

Width x (m) Length L = 80 − 2x (m) Area A = xL (m²)
10 60 600
20 40 800
30 20 600

The symmetrical pattern confirms that the maximum occurs at the centre of the domain.

数据呈现出对称性,进一步确认最大值出现在定义域的正中央。


7. Alternative Method: Differentiation | 另一种方法:微分

The same maximum can be found using calculus. Differentiate A with respect to x:

同样可以用微积分求最大值。对 x 求导:

dA/dx = 80 − 4x

Setting dA/dx = 0 gives 80 − 4x = 0 → x = 20.

令 dA/dx = 0,得 80 − 4x = 0 → x = 20。

The second derivative d²A/dx² = −4 < 0 confirms that x = 20 corresponds to a maximum.

二阶导数 d²A/dx² = −4 < 0 确认 x = 20 对应最大值。


8. Common Mistakes and Exam Tips | 常见错误与考试要点

  • Forgetting that the river side needs no fencing, and incorrectly writing the perimeter as 2x + 2L = 80.

    忘记河岸一边无需围栏,错误地写成 2x + 2L = 80。

  • Omitting the domain 0 < x < 40; AQA mark schemes often award a mark for stating a sensible domain.

    遗漏定义域 0 < x < 40;AQA 评分标准通常会为写出合理定义域给分。

  • Stopping at x = 20 without finding the maximum area A = 800 or the corresponding length L = 40.

    求出 x = 20 后不再继续,漏掉最大面积 A = 800 或对应长度 L = 40。

  • Making a sign error when completing the square; always expand −2(x − 20)² + 800 to check it returns −2x² + 80x.

    配方时出现符号错误;务必展开 −2(x − 20)² + 800,验证是否还原为 −2x² + 80x。

Example 2.6.2 demonstrates the complete modelling cycle: define variables, construct the model, apply algebra, interpret the result, and verify. Mastering this cycle is essential for securing top marks in AQA Pure Mathematics.

例题 2.6.2 完整展示了建模流程:定义变量、建立模型、运用代数、解释结果、验证答案。掌握这一流程是在 AQA 纯数学考试中冲击高分的关键。

Published by TutorHao | Mathematics Revision Series | aleveler.com

更多咨询请联系16621398022(同微信)

📞 咨询 / 微信:16621398022(同微信)
A-Level / IGCSE / IB / AP 课程辅导 · 真题资料 · 留学申请规划
查看联系方式 →

Comments

屏轩国际教育cambridge primary/secondary checkpoint, cat4, ukiset,ukcat,igcse,alevel,PAT,STEP,MAT, ibdp,ap,ssat,sat,sat2课程辅导,国外大学本科硕士研究生博士课程论文辅导

This site uses Akismet to reduce spam. Learn how your comment data is processed.

咨询微信:16621398022(同微信) · 联系我们