Vector Representation of Forces | 力的矢量表示

📚 Vector Representation of Forces | 力的矢量表示

Forces are not just numbers; they have both size and direction. This is why we call them vectors. The ability to represent a force as a vector allows us to predict its effect, combine forces, and solve mechanics problems systematically.

力不只是数字,它既有大小又有方向,因此我们称之为矢量。能够将力表示为矢量,使我们能够预测它的效果、合成多个力,并有条不紊地解决力学问题。


1. Understanding Force as a Vector | 理解力作为矢量

Force is a push or pull that can change the motion or shape of an object. A scalar quantity, like mass, can be described by one number; a vector quantity, like force, requires both a magnitude and a direction.

力是改变物体运动状态或形状的推或拉。标量(如质量)只需一个数即可描述;矢量(如力)则需要大小和方向两个信息。

  • Magnitude: measured in newtons (N).

    大小:以牛顿(N)为单位。

  • Direction: described by an angle relative to a reference line or by coordinate axes.

    方向:用相对于参考线的角度或坐标轴来表示。

  • Point of application: the location on the body where the force acts.

    作用点:力作用在物体上的位置。


2. Scalars vs Vectors | 标量与矢量

Some quantities have only a value; others have both value and direction. The table below shows the difference.

有些量只有数值,有些量则同时具有数值和方向。下表展示了它们的区别。

Quantity Type / 类型 Examples / 例子 Description / 描述
Scalar / 标量 mass, temperature, speed, energy / 质量、温度、速率、能量 described by magnitude only / 仅用大小描述
Vector / 矢量 force, velocity, displacement, acceleration / 力、速度、位移、加速度 described by magnitude and direction / 需要用大小和方向描述

An object’s speed is scalar, but its velocity is a vector: it includes direction. Similarly, knowing a force is 10 N is not enough; we also need to know which way it acts.

物体的速率是标量,速度却是矢量,因为速度包含方向。同样,只知道力为 10 N 还不够,还必须知道它朝哪个方向作用。


3. Directed Line Segments | 有向线段

A force can be represented graphically by a directed line segment. The length of the arrow shows the magnitude to a chosen scale, and the arrowhead shows the direction.

力可以用有向线段来图示。箭头的长度按选定的比例尺表示力的大小,箭头方向表示力的方向。

For example, if 1 cm represents 5 N, then a 20 N force is drawn as an arrow 4 cm long.

例如,若 1 cm 表示 5 N,那么 20 N 的力应画成 4 cm 长的箭头。

  • Tail: point of application.

    箭尾:作用点。

  • Length: magnitude, proportional to the size of the force.

    长度:大小,与力的大小成正比。

  • Arrowhead: direction in which the force acts.

    箭头:力的作用方向。


4. Component Form | 分量形式

On a coordinate grid, any force F can be split into a horizontal component Fx and a vertical component Fy. This is called the component form.

在坐标网格中,任意力 F 可以分解为水平分量 Fx 和竖直分量 Fy。这种表示方法称为分量形式。

For a 2D force, we can write:

F = Fx i + Fy j

where i and j are unit vectors in the x and y directions.

其中 i 和 j 是沿 x 轴和 y 轴方向的单位矢量。

In three dimensions we add a third component: F = Fx i + Fy j + Fz k.

在三维空间中我们添加第三个分量:F = Fx i + Fy j + Fz k。


5. Magnitude and Direction from Components | 由分量求大小与方向

If the components Fx and Fy are known, the magnitude can be found using Pythagoras’ theorem.

如果已知分量 Fx 和 Fy,则可以用勾股定理求出合力的大小。

|F| = √(Fx² + Fy²)

The angle θ that the force makes with the x-axis is given by:

力与 x 轴之间的夹角 θ 由下式给出:

θ = tan⁻¹(Fy / Fx)

Remember to check which quadrant the force lies in before trusting the calculator’s angle.

注意:使用计算器前,要先判断力所在的象限,不能直接照搬计算器给出的角度。


6. Resolving a Force into Components | 将一个力分解为分量

If a force F acts at an angle θ to the positive x-axis, its components are:

若力 F 与 x 轴正方向成 θ 角,则它的分量为:

Fx = F cos θ

Fy = F sin θ

These are sometimes called the resolved parts of the force. If the angle is given to the vertical, swap sin and cos.

这两个分量有时称为力的正交分量。如果已知的是与竖直方向的夹角,则 sin 和 cos 要对调。

Resolving is one of the most important skills in A-Level mechanics.

分解是 A-Level 力学中最关键的技能之一。


7. Adding Forces: Resultant | 力的合成:合力

To find the resultant of several forces, add their vector components. If F = Fx i + Fy j and G = Gx i + Gy j, then:

欲求多个力的合力,只需将它们各自的分量相加。若 F = Fx i + Fy j,G = Gx i + Gy j,则:

R = F + G = (Fx + Gx) i + (Fy + Gy) j

Graphically, we draw the forces head-to-tail; the resultant is the vector from the first tail to the last arrowhead.

在图形上,我们把力首尾相接;合力就是从第一个箭尾指向最后一个箭头的矢量。

Never add magnitudes of two non-parallel forces directly.

两个不平行力的大小绝不能直接相加。


8. Equilibrium | 平衡

When several forces act on a body and the resultant is zero, the body is in equilibrium. This means:

当多个力作用在物体上且合力为零时,物体处于平衡状态。这意味着:

ΣFx = 0 and ΣFy = 0

Simultaneously, the vector sum of all forces is the zero vector.

与此同时,所有力的矢量和为零矢量。

Common exam situations involve three forces in equilibrium; they can be represented as a closed triangle of vectors.

常见的考题情境是三个力使物体平衡;这三个力可以构成一个闭合矢量三角形。


9. Negative Vector and Subtracting Forces | 负矢量与力的减法

The negative of a force F, written −F, has the same magnitude but exactly the opposite direction.

力 F 的负矢量记作 −F,它的大小相同,但方向恰好相反。

Subtraction of vectors is the same as adding the negative vector:

矢量的减法等同于加上负矢量:

F − G = F + (−G)

This idea is useful when calculating relative forces or net forces in opposite directions.

这一概念在计算相反方向的力或净力时非常有用。


10. Worked Example 1 | 例题 1

Two forces act on a particle: 6 N due east and 8 N due north. Find the magnitude and direction of the resultant force.

一质点上作用有两个力:6 N 向东,8 N 向北。求合力的大小和方向。

Take east as i and north as j.

取东为 i,北为 j。

F₁ = 6i, F₂ = 8j

R = 6i + 8j

Find the magnitude:

Published by TutorHao | A-Level Mathematics Revision Series | aleveler.com

更多咨询请联系16621398022(同微信)

📞 咨询 / 微信:16621398022(同微信)
A-Level / IGCSE / IB / AP 课程辅导 · 真题资料 · 留学申请规划
查看联系方式 →

Comments

屏轩国际教育cambridge primary/secondary checkpoint, cat4, ukiset,ukcat,igcse,alevel,PAT,STEP,MAT, ibdp,ap,ssat,sat,sat2课程辅导,国外大学本科硕士研究生博士课程论文辅导

This site uses Akismet to reduce spam. Learn how your comment data is processed.

咨询微信:16621398022(同微信) · 联系我们