AQA A-Level Physics June 2018 Paper 2 Insert: Key Formulas and Exam Strategy | AQA A-level 物理 2018年6月试卷2资料页：核心公式与应试策略

📚 AQA A-Level Physics June 2018 Paper 2 Insert: Key Formulas and Exam Strategy | AQA A-level 物理 2018年6月试卷2资料页：核心公式与应试策略

The June 2018 AQA A-level Physics Paper 2 insert is an essential reference booklet containing equations and data that candidates must use effectively during the exam. This article breaks down the key formula sections, explains how to apply them, and highlights common mistakes, helping you turn the insert into a working toolkit.

2018年6月AQA A-level 物理试卷2的资料页是考试中必须高效使用的重要参考册，内含方程和数据。本文将逐项拆解其中的关键公式板块，讲解应用方法并指出常见错误，帮助你把这页资料变成实用的解题工具箱。

1. Understanding the Insert Structure | 了解资料页结构

The insert is not just a list of random formulas; it is organised by topic. On the AQA Paper 2 insert, you will find fundamental constants, mechanics, materials, waves, thermal physics, electric and magnetic fields, and nuclear physics. Knowing where each formula sits saves precious time in the exam.

资料页并非随机罗列的公式，而是按主题组织。在AQA 试卷2资料页上，你会找到基本常数、力学、材料、波动、热物理、电场与磁场以及核物理。知道每个公式所在的位置，能在考试中节省宝贵时间。

Constants such as g = 9.81 m s⁻² and c = 3.00 × 10⁸ m s⁻¹ are printed at the top.
常用常数如 g = 9.81 m s⁻² 和 c = 3.00 × 10⁸ m s⁻¹ 印在页首。
Mechanics formulas include equations of motion, work, energy, power, and circular motion.
力学公式包括运动方程、功、能、功率和圆周运动。
Materials sections list stress, strain, Young modulus, and strain energy.
材料部分列出应力、应变、杨氏模量和应变能。
Electric and magnetic sections cover Coulomb’s law, capacitance, and electromagnetic induction.
电场与磁场部分覆盖库仑定律、电容和电磁感应。

2. Mechanics and Materials Formulas | 力学与材料公式

The mechanics formulas on the insert are essential for solving projectile and collision problems. For example, the suvat equations are printed in full, allowing you to select the correct one without memorising them.

资料页上的力学公式对于解决抛体和碰撞问题至关重要。例如，suvat 方程完整印出，让你无需死记便可选择正确公式。

v = u + at, s = ut + ½at², v² = u² + 2as

For materials, the Young modulus is defined as stress divided by strain, and the insert gives the standard form:

对于材料，杨氏模量定义为应力除以应变，资料页给出的标准形式为：

E = σ / ε = (F/A) / (Δl/l) = Fl / (AΔl)

Strain energy per unit volume is ½σε or equivalently ½FΔl for a linear spring.
单位体积应变能为 ½σε，对于线性弹簧等价于 ½FΔl。
Remember that the Young modulus is only valid while the material obeys Hooke’s law.
记住杨氏模量仅在材料服从胡克定律时有效。

3. Waves and Optics Formulas | 波动与光学公式

The insert provides key wave relationships such as wave speed, frequency, wavelength, and the diffraction grating equation. These are heavily tested in Paper 2.

资料页提供关键波动关系，如波速、频率、波长和衍射光栅方程，这些在试卷2中考查频率很高。

v = fλ, n = c/v, d sinθ = nλ

The refractive index n links the speed of light in vacuum c to its speed in a medium v.
折射率 n 将真空光速 c 与光在介质中的速度 v 联系起来。
For Young’s double slit, the fringe spacing w is given by w = λD/s, which is often rearranged on the insert.
对于杨氏双缝干涉，条纹间距 w 由 w = λD/s 给出，资料页上常有变形。
The diffraction grating equation d sinθ = nλ assumes normal incidence and a small angle approximation for the first order.
衍射光栅方程 d sinθ = nλ 假设垂直入射，且一级衍射角较小。

4. Thermal Physics and Ideal Gases | 热物理与理想气体

The thermal section includes the ideal gas equation, kinetic theory relationships, and the first law of thermodynamics. These formulas connect macroscopic measurements to microscopic particle behaviour.

热学部分包括理想气体方程、分子运动论关系和热力学第一定律。这些公式将宏观测量与微观粒子行为联系起来。

pV = nRT, pV = ⅓Nm⟨c²⟩, ΔQ = ΔU + ΔW

n is the number of moles, R is the molar gas constant (8.31 J mol⁻¹ K⁻¹).
n 是物质的量，R 是摩尔气体常数（8.31 J mol⁻¹ K⁻¹）。
The mean translational kinetic energy of a molecule is ½m⟨c²⟩ = ³⁄₂kT where k is Boltzmann’s constant.
分子平均平动动能为 ½m⟨c²⟩ = ³⁄₂kT，其中 k 是玻尔兹曼常数。
The first law sign convention: ΔQ is heat added to the system, ΔW is work done by the system.
热力学第一定律符号约定：ΔQ 是系统吸收的热量，ΔW 是系统对外做的功。

5. Electric Fields and Capacitance | 电场与电容

Electric field formulas on the insert include Coulomb’s law, field strength for a uniform field, and capacitance definitions. Be careful with units: charge is in coulombs, distance in metres, potential in volts.

资料页上的电场公式包括库仑定律、匀强电场场强以及电容定义。注意单位：电荷用库仑、距离用米、电势用伏特。

F = kQ₁Q₂ / r², E = V/d, C = Q/V

Coulomb’s law uses the permittivity constant: k = 1/(4πε₀) with ε₀ = 8.85 × 10⁻¹² F m⁻¹.
库仑定律使用介电常数：k = 1/(4πε₀)，其中 ε₀ = 8.85 × 10⁻¹² F m⁻¹。
Energy stored in a capacitor can be written as W = ½QV = ½CV² = Q²/(2C).
电容器储存的能量可写成 W = ½QV = ½CV² = Q²/(2C)。
For parallel plates, C = ε₀A/d is also provided on the insert when needed.
对于平行板，资料页还会在需要时提供 C = ε₀A/d。

6. Magnetic Fields and Electromagnetic Induction | 磁场与电磁感应

Magnetic force and electromagnetic induction are common sources of 6-mark questions. The insert gives the Lorentz force and the magnetic flux linkage formula.

磁力和电磁感应是6分大题常见来源。资料页提供洛伦兹力和磁通链公式。

F = BIL sinθ, F = BQv sinθ, Φ = BA cosθ

The induced emf is given by Faraday’s law: E = -N ΔΦ/Δt, with Lenz’s law accounting for the negative sign.
感应电动势由法拉第定律给出：E = -N ΔΦ/Δt，负号由楞次定律解释。
For a rotating coil in a uniform field, the maximum emf occurs when the plane of the coil is parallel to the field.
对于匀强磁场中转动的线圈，当线圈平面平行于磁场时电动势最大。
Remember that sinθ is the angle between the conductor and the field direction.
记住 sinθ 中 θ 是导体与磁场方向之间的夹角。

7. Nuclear Physics Formulas | 核物理公式

The nuclear section includes the radioactive decay law, half-life, and mass-energy equivalence. These formulas are often used together in calculation questions.

核物理部分包括放射性衰变定律、半衰期和质能等价。这些公式常在计算题中联合使用。

A = λN, N = N₀e^(-λt), t½ = ln2/λ, ΔE = Δmc²

Activity A is measured in becquerels (Bq), and the decay constant λ has units s⁻¹.
活度 A 的单位是贝可勒尔（Bq），衰变常数 λ 的单位是 s⁻¹。
Mass-energy equivalence uses c = 3.00 × 10⁸ m s⁻¹; always convert mass to kilograms before calculation.
质能等价使用 c = 3.00 × 10⁸ m s⁻¹；计算前务必将质量换算为千克。
In binding energy calculations, the mass defect is the difference between the total mass of nucleons and the nuclear mass.
在结合能计算中，质量亏损是核子总质量与原子核质量之差。

8. Units and Dimensional Checks | 单位与量纲检查

One of the best uses of the insert is checking units. Many AQA questions award marks for the correct unit, and a quick dimensional analysis can catch mistakes.

资料页的最佳用途之一是检查单位。许多AQA题目会给正确单位赋分，快速进行量纲分析能帮你发现错误。

Quantity	Unit	Symbol
Energy / Work	Joule	J = kg m² s⁻²
Pressure	Pascal	Pa = kg m⁻¹ s⁻²
Capacitance	Farad	F = C V⁻¹ = A² s⁴ kg⁻¹ m⁻²
Magnetic flux	Weber	Wb = V s = kg m² s⁻² A⁻¹

Always ask yourself: does my final answer have the correct power of ten and the right base units before writing the unit symbol?

在下笔写单位前，先问自己：最终答案的数量级和基本单位是否正确？

9. Common Pitfalls | 常见陷阱

Students often lose marks not because they do not know the formulas, but because they misread the insert or use the wrong version of a formula. Here are the most frequent traps.

学生失分往往不是因为不会公式，而是看错资料页或选错公式形式。以下是最常见陷阱。

Using E = V/d for a non-uniform field; it is only valid for a uniform field such as between parallel plates.
在非匀强电场中使用 E = V/d；该公式只适用于平行板间的匀强电场。
Confusing A = λN (activity) with N = N₀e^(-λt) (remaining nuclei). They both use decay constant, but describe different quantities.
混淆 A = λN（活度）与 N = N₀e^(-λt)（剩余核数）。两者都用衰变常数，但描述不同物理量。
Forgetting the negative sign in ΔΦ/Δt when applying Lenz’s law; the magnitude of emf is often what you calculate first.
应用楞次定律时忘记 ΔΦ/Δt 前面的负号；通常先计算电动势的大小。
Using the wrong angle in F = BIL sinθ; θ must be the angle between current direction and magnetic field.
在 F = BIL sinθ 中用错角度；θ 必须是电流方向与磁场方向的夹角。

10. Exam Strategy: Using the Insert Effectively | 应试策略：高效使用资料页

In the exam, you should not read the insert cover to cover. Instead, use it as a lookup table when you identify the physics concept involved. This saves time and reduces errors.

在考场上，你不应从头到尾读资料页。而应在判断出题目考察的物理概念后，将其作为查找表使用。这样既省时又减少错误。

Before starting a calculation, write down all the quantities given and the quantity you need to find.
开始计算前，先写下所有已知量和待求量。
Circle the formula on the insert that links those quantities, then check units before substituting numbers.
在资料页上圈出连接这些量的公式，代入数值前检查单位。
For multi-step questions, keep intermediate values to three significant figures and round only at the final answer.
对多步问题，中间值保留三位有效数字，只在最终答案中四舍五入。
If you are unsure whether a formula is appropriate, look for the condition printed next to it on the insert.
如果不确定某个公式是否适用，可查看资料页上该公式旁边标注的适用条件。

By treating the insert as a map of the AQA syllabus, you can navigate any Paper 2 question with confidence.

将资料页视为AQA考纲的地图，你就能自信地应对试卷2的任何问题。

Published by TutorHao | Physics Revision Series | aleveler.com

更多咨询请联系16621398022（同微信）

AQA A-Level Physics June 2018 Paper 2 Insert: Key Formulas and Exam Strategy | AQA A-level 物理 2018年6月试卷2资料页：核心公式与应试策略